• From a diy Arduino quadcopter to a versatile octocopter flight controller.

    In this build / maiden flight video I’m building a octocopter for my own flight controller. Check my website for more information: http://www.brokking.net/rpas_main.html Watch the next part to see the carbon fiber upgrade: https://youtu.be/8A23UG0VPpo

    published: 08 Oct 2015
  • CHEAP DIY drone Build log and test flights octocopter

    Here i show you a short log of the build, programming and the first test flights of an octocopter made out of aluminium rails and the APM Flight control You can buy the APM 2.6 Flight control here : http://amzn.to/1PzqSBZ Please subscribe and Like for more :)

    published: 31 Dec 2015
  • Structure from Motion Octocopter - Computerphile

    Thanks to Audible for supporting our channel. Get a free 30 day trial at http://www.audible.com/Computerphile Creating 3D models with an Octocopter, a camera and some custom software. Christian Mostegel, Research Assistant at TU Graz in Austria explains some of the technology behind the 3D Pitoti Project. More about 3D Pitoti: http://bit.ly/computerphile_rockscanner Finite State Automata: https://youtu.be/vhiiia1_hC4 CPU vs GPU: https://youtu.be/_cyVDoyI6NE 3D Rock Art Scanner: https://youtu.be/Ahdnkj77rAY Brain Scanner: https://youtu.be/TQ0sL1ZGnQ4 http://www.facebook.com/computerphile https://twitter.com/computer_phile This video was filmed and edited by Sean Riley. Computer Science at the University of Nottingham: http://bit.ly/nottscomputer Computerphile is a sister project t...

    published: 05 Feb 2016
  • YMFC-3D part 6 - Build your own Arduino quadcopter flight controller with source code..

    PLEASE USE THE YMFC-AL (AUTO-LEVEL) SOFTWARE: https://youtu.be/DYpHB-LfloI These videos are just for reference. The new software is much easier to setup and supports almost all transmitters. You can download the Arduino sketch here: http://www.brokking.net/ymfc-al_main.html

    published: 16 May 2015
  • A Swarm of Nano Quadrotors

    Check out our latest video: http://www.youtube.com/watch?v=uj0v1BgzUdc Experiments performed with a team of nano quadrotors at the GRASP Lab, University of Pennsylvania. Vehicles developed by KMel Robotics. Special thanks to Professor Daniel Lee for his support.

    published: 31 Jan 2012
  • Carbon fiber upgrade of my personal designed octocopter drone.

    Don’t forget to visit my website: http://www.brokking.net In this video I’ll show you the carbon fiber upgrade of my personal designed octocopter. Previous video: https://www.youtube.com/watch?v=G52LtnBRG5w Weight without batteries: 1210 grams. Weight with two 3S/3800mAh/20C batteries: 1830 grams. Flight time without payload: 23 minutes (hover / no wind). Motor diagonal: 700mm.

    published: 19 Feb 2016
  • KK Multicopter control board V 5.5 Setting Startup Flying Controller Programming

    kk 5.5 board Calibration,kk multicopter control board V 5.5 setup ,kk multicopter control board setting,Flying kk multicopter control board V 5.5 programming For Learning More Visit www.robofeast.com if any Query Call on +91-8505838080

    published: 20 Aug 2015
  • How to build a Pro FPV Racing DRONE for ONLY $99 Full Build guide + Giveaway

    Step by step guide showing you how to build an AWESOME FPV racing drone for around $99. This build is SIMPLE, CHEAP and most of all results in a crazy fast FPV racing quadcopter with awesome performance at an even better price. . Giveaway is over. Congrats to user "Davo Johnson" GIVEAWAY details after component links. PARTS - things usually sell out after I make videos on them so I linked a ton of extra components below that people can use if something sells out. $99 BASE VERSION Frame - http://bit.ly/2npZVch ESCs - http://bit.ly/2nq6zzi Motors - http://bit.ly/2mv9h7z (other colour motors are linked below) PDB - http://bit.ly/2n9WZ17 VTX (Base) - http://bit.ly/2mWTwCb FC (base version - naze rev 6) -http://bit.ly/2nqc3tF Strongly recommend upgrade version FPV camera (base) - http://bit...

    published: 24 Mar 2017
  • My Ugly Pixhawk Octocopter: indoor maiden flight

    The strange roll problem I was having previously seems to have magically disappeared. It is flying quite well now, and will be even better once I get it outside and tune it. I was hoping to get outside and fly today, but I spent too much time programming my Taranis and rigging up my landing gear from IKEA clothes hangers. Parts List A lot of this was just scrounged together from parts I already had, so I don't claim that this is an ideal build, although it does work fine. Motors: Turnigy NTM 28-26A 1200kv ESCs: Hobby King 30A (flashed with SimonK) Props: Hobby King 8045 SF (have also used 9047) Battery: 4S 2200-3000 mAH (various Turnigy and nano-tech) Flight controller: Pixhawk and GPS from 3DRobotics Receiver: FrSky X8R (connected via SBUS) Frame: FliteTest AnyCopter hub, Knuckle H-Qua...

    published: 27 Jan 2014
  • The YMFC-3D V2 – Arduino quadcopter made easy – with free source code

    Questions? Visit the YMFC-3D V2 website: http://www.brokking.net/ymfc-3d_v2_main.html Check the $150 hardware list on this page (click question 8) : http://www.brokking.net/ymfc-3d_v2_qanda.html You think that building a DIY Arduino based quadcopter is difficult? Think again. I made the YMFC-3D V2 flight controller software so everybody can build their own Arduino quadcopter and having a great learning experience. School project, just for fun or something to build with you kids? No fancy or difficult software. Easy build, easy setup and fun to fly.

    published: 21 Jan 2016
  • MPU-6050 6dof IMU tutorial for auto-leveling quadcopters with Arduino source code

    This video explains how to program your own inertial measurement unit, or IMU for short, that can be used for auto-leveling (self-balancing) a multicopter. No Kalman filters, no libraries, no difficult calculations, just a simple and easy to understand tutorial that explains how to build an IMU that can be used for auto-leveling a multicopter. Website and Arduino code: http://www.brokking.net/imu.html Part 2: https://youtu.be/j-kE0AMEWy4

    published: 21 May 2016
  • Improve your Arduino programming skills - The budget oscilloscope.

    If you are on a shoestring budget a decent oscilloscope is not an option. But what about those cheap budget oscilloscopes? Is it rubbish or can it still be a useful tool to improve your engineering’s skills? Well, I bought one to try it out. In this video I will be using the Hantek 6022BE 20MHz dual channel oscilloscope. Three examples will give you a better understanding of what can go wrong while building a simple Arduino setup. The Oscilloscope that I bought: http://www.dx.com/p/hantek-6022be-2-ch-analog-20mhz-48ms-s-oscilloscope-silver-black-201072?Utm_rid=78761898&Utm_source=affiliate My website: http://www.brokking.net Content of the cd: http://www.brokking.net/Youtube/Hantek_6022BE_CD.zip Sigrok and OpenHantek: https://sigrok.org/wiki/Hantek_6022BE http://openhantek.org/ Ardui...

    published: 06 Oct 2016
  • (3/9) Quadcopter Building for Beginners - The Flight Controller, options and checking

    Consider supporting the channel by visiting http://www.patreon.com/painless360 In this third video in the series we look at the flight controller (a clone of the Seriously Pro F3 flight controller) but this works with Naze32 and other boards based on both of them. We look at what the flight controller actually does and then show how to load Cleanflight and connect to the board for the first time to make sure it's ok. You can see the kit we're using here - http://goo.gl/u3N0Fk Join us in the next video where we look at the frame and working out how to mount all the pieces we have. Thanks for watching, please LIKE and SUBSCRIBE. Happy flying!

    published: 08 Jul 2016
  • Flipping the wrong switch is causing a very stressful 1km octocopter flyaway.

    Looking at the sky and seeing a whole lot of sky…… but no octocopter. We all seen the DJI Phantom and Inspire 1 flyway’s. But this can also happen when you are not paying attention and accidentally flip the wrong switch on your transmitter. See the build of this octocopter here: https://www.youtube.com/watch?v=G52LtnBRG5w And the playlist: https://www.youtube.com/watch?v=lW7NbzqJ_5w&list=PL0K4VDicBzsgMF4rrGlGWlBwrtJMf0Dmp

    published: 15 Nov 2015
  • 15 Multirotor Tips when building and flying - Quadcopter / Hexacopter / Octocopter

    I wanted to take a moment to share with everyone some tips for multirotors (quadcopters, hexacopters, tricopters, octocopters). Whether you're going to be building one or already built or bought one you will want to remember all of these things. 1. Check all solder joints well 2. Tighten all screws (once you know everything is good - locktite) 3. GPS/Compass facing front 4. Flight Controller facing front 5. Use foam on flight controller - http://shop.dubro.com/p/1-4-r-c-protective-foam-rubber-qty-pkg-1?pp=12 6. Balance props 7. Tighten prop adapters 8. Velcro on battery and velcro strap 9. Setup battery failsafe 10. Setup radio failsafe 11. Range test with radio/receiver 12. Make sure GPS is locked in before flying 13. Keep multirotor balanced (battery/cameras) 14. Explain RTL/...

    published: 25 May 2014
  • Octocopter drone takes flight over San Francisco

    A video camera equipped octocopter is flown at Burning Man Decompression in San Francisco by the guys at ZM Interactive. http://www.zminteractive.com/

    published: 11 Oct 2012
  • Tarot T1000 Octocopter maiden flight with 3 axis gimbal and Radian System

    Subscribe to this channel here: http://www.youtube.com/subscription_center?add_user=Locoracers Did the maiden flight today with my Tarot T1000 and the 3 axis gimbal. Went surprisingly flawless. Sorry for the bad quality of the Canon 600D but it was already getting dark and I do not have a fix lens at the moment. Will get one soon :-). This represents basically the flight done after coming straight from the building bench. The Radian System has been setup just on the bench before that flight and you can see that the stabilization is pretty good. I have also tried to use the Tarot ZYX GS System but was not able to get really decent results out of it. Also it seemed to me that the gains were not stable (Temp Drift e.t.c.) No color correction or warping has been applied to the footage. Se...

    published: 06 Oct 2013
  • My new diy quadcopter fligh controller for autonomous flight. Bye Bye Arduino Uno

    In this video I show my new personal designed multicopter flight controller and explain some of it's features. Check my website for more information: http://www.brokking.net/rpas_main.html

    published: 10 Jul 2015
  • Octocopter ESC Calibration

    published: 08 Oct 2012
  • (1/8) APM 2.5/2.6/2.7/2.8 - Simple installation and setup overview

    Consider supporting the channel by visiting www.patreon.com/painless360 See my playlist for all the videos in the series - https://www.youtube.com/playlist?list=PLYsWjANuAm4oswLMu9OU8yOm-9J6y30XW In this first video of the APM 2.5/2.6 series I show how to take the new board from 'out of the packet' to having the board connected to the radio receiver, configured and setup ready for installation into the frame of the model. http://ardupilot.org/ The latest firmware version supported on the APM 2.x boards is V3.2.1. When loading the firmware choose the option in the lower right hand of the screen to select 'Pick Previous Firmware' to load V3.2.1 of the code. In this video we cover -- • What you'll need • Selecting and installing the firmware • Calibration of the magnetometer and accele...

    published: 21 Jul 2014
  • Tarot 680pro octocopter engine calibration faild apm+ardupilot

    published: 01 Feb 2015
  • Arduino drone - Part1 Flight Controller

    Full Arduino based drone. The tutorial is divided in a few parts. In this video I build the flight controller using the Arduino NANO and the MPU6050 gyro//accelerometer. To program the flight controller I've used the multiwii platform. Wait for the next parts, the radio receiver/transmitter and the final drone build. Help my projects on Patreon : https://www.patreon.com/ELECTRONOOBS my Q&A page: http://electronoobs.com/eng_preguntas.php ------------------COUPONS-------------------- Crealitu CR10: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?lkid=11382974 Coupon code: "11CR10EU" Creality CR10 MINI: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_778274.html?lkid=11814180 COUPON: CR10MINI Anet E10: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_6...

    published: 19 Apr 2017
  • How to configure Open Pilot CC3D Flight Controller with Ground Controller Station v14.10 Mini Me

    This video Shows you how to configure Open Pilot CC3D flight controller using the Latest Ground Control Station (GCS) v 14.10 Mini Me. Download Page for Latest GCS release: http://wiki.openpilot.org/display/BUILDS/OpenPilot+Software+Downloads Installation Instruction for GCS: http://wiki.openpilot.org/display/Doc/Installing+the+Ground+Control+Station You can buy the F450 Quadcopter shown in the video here: http://scratchbuilds.com/product/arf-f450-quadcopter-w-cc3d-flight-controller/ You can buy SB 250 Mini FPV Racing Quadcopter here: http://scratchbuilds.com/product/arf-sb-250-mini-fpv-racing-quadcopter/ Open Pilot CC3D Flight Controller here: http://scratchbuilds.com/product/open-pilot-cc3d-flight-controller-with-case/ Lemon Rx Receivers Buy Here: http://scratchbuilds.com/product-c...

    published: 31 Dec 2014
  • The Building of an Octocopter from Scratch

    This is a video showing the construction of an octocopter. 1/8" birch plywood 1/2" 6061 aluminum tubing 2 sets of Emax 25A ESCs with 810Kv motors 10x4.5 props KK2.0 flight controller hobbyking standard servos FlySky FS-i10 GensAce 5600mAh 30c aluminum plated correlated pvc (landing gear) hobbyking hinges

    published: 01 Oct 2014
developed with YouTube
From a diy Arduino quadcopter to a versatile octocopter flight controller.

From a diy Arduino quadcopter to a versatile octocopter flight controller.

  • Order:
  • Duration: 14:52
  • Updated: 08 Oct 2015
  • views: 75407
videos
In this build / maiden flight video I’m building a octocopter for my own flight controller. Check my website for more information: http://www.brokking.net/rpas_main.html Watch the next part to see the carbon fiber upgrade: https://youtu.be/8A23UG0VPpo
https://wn.com/From_A_Diy_Arduino_Quadcopter_To_A_Versatile_Octocopter_Flight_Controller.
CHEAP DIY drone Build log and test flights octocopter

CHEAP DIY drone Build log and test flights octocopter

  • Order:
  • Duration: 10:55
  • Updated: 31 Dec 2015
  • views: 3708
videos
Here i show you a short log of the build, programming and the first test flights of an octocopter made out of aluminium rails and the APM Flight control You can buy the APM 2.6 Flight control here : http://amzn.to/1PzqSBZ Please subscribe and Like for more :)
https://wn.com/Cheap_Diy_Drone_Build_Log_And_Test_Flights_Octocopter
Structure from Motion Octocopter - Computerphile

Structure from Motion Octocopter - Computerphile

  • Order:
  • Duration: 7:22
  • Updated: 05 Feb 2016
  • views: 47918
videos
Thanks to Audible for supporting our channel. Get a free 30 day trial at http://www.audible.com/Computerphile Creating 3D models with an Octocopter, a camera and some custom software. Christian Mostegel, Research Assistant at TU Graz in Austria explains some of the technology behind the 3D Pitoti Project. More about 3D Pitoti: http://bit.ly/computerphile_rockscanner Finite State Automata: https://youtu.be/vhiiia1_hC4 CPU vs GPU: https://youtu.be/_cyVDoyI6NE 3D Rock Art Scanner: https://youtu.be/Ahdnkj77rAY Brain Scanner: https://youtu.be/TQ0sL1ZGnQ4 http://www.facebook.com/computerphile https://twitter.com/computer_phile This video was filmed and edited by Sean Riley. Computer Science at the University of Nottingham: http://bit.ly/nottscomputer Computerphile is a sister project to Brady Haran's Numberphile. More at http://www.bradyharan.com
https://wn.com/Structure_From_Motion_Octocopter_Computerphile
YMFC-3D part 6 - Build your own Arduino quadcopter flight controller with source code..

YMFC-3D part 6 - Build your own Arduino quadcopter flight controller with source code..

  • Order:
  • Duration: 9:04
  • Updated: 16 May 2015
  • views: 242596
videos
PLEASE USE THE YMFC-AL (AUTO-LEVEL) SOFTWARE: https://youtu.be/DYpHB-LfloI These videos are just for reference. The new software is much easier to setup and supports almost all transmitters. You can download the Arduino sketch here: http://www.brokking.net/ymfc-al_main.html
https://wn.com/Ymfc_3D_Part_6_Build_Your_Own_Arduino_Quadcopter_Flight_Controller_With_Source_Code..
A Swarm of Nano Quadrotors

A Swarm of Nano Quadrotors

  • Order:
  • Duration: 1:43
  • Updated: 31 Jan 2012
  • views: 8353704
videos
Check out our latest video: http://www.youtube.com/watch?v=uj0v1BgzUdc Experiments performed with a team of nano quadrotors at the GRASP Lab, University of Pennsylvania. Vehicles developed by KMel Robotics. Special thanks to Professor Daniel Lee for his support.
https://wn.com/A_Swarm_Of_Nano_Quadrotors
Carbon fiber upgrade of my personal designed octocopter drone.

Carbon fiber upgrade of my personal designed octocopter drone.

  • Order:
  • Duration: 7:19
  • Updated: 19 Feb 2016
  • views: 15128
videos
Don’t forget to visit my website: http://www.brokking.net In this video I’ll show you the carbon fiber upgrade of my personal designed octocopter. Previous video: https://www.youtube.com/watch?v=G52LtnBRG5w Weight without batteries: 1210 grams. Weight with two 3S/3800mAh/20C batteries: 1830 grams. Flight time without payload: 23 minutes (hover / no wind). Motor diagonal: 700mm.
https://wn.com/Carbon_Fiber_Upgrade_Of_My_Personal_Designed_Octocopter_Drone.
KK Multicopter control board V 5.5 Setting Startup Flying Controller Programming

KK Multicopter control board V 5.5 Setting Startup Flying Controller Programming

  • Order:
  • Duration: 14:40
  • Updated: 20 Aug 2015
  • views: 33438
videos
kk 5.5 board Calibration,kk multicopter control board V 5.5 setup ,kk multicopter control board setting,Flying kk multicopter control board V 5.5 programming For Learning More Visit www.robofeast.com if any Query Call on +91-8505838080
https://wn.com/Kk_Multicopter_Control_Board_V_5.5_Setting_Startup_Flying_Controller_Programming
How to build a Pro FPV Racing DRONE for ONLY $99 Full Build guide + Giveaway

How to build a Pro FPV Racing DRONE for ONLY $99 Full Build guide + Giveaway

  • Order:
  • Duration: 42:37
  • Updated: 24 Mar 2017
  • views: 901995
videos
Step by step guide showing you how to build an AWESOME FPV racing drone for around $99. This build is SIMPLE, CHEAP and most of all results in a crazy fast FPV racing quadcopter with awesome performance at an even better price. . Giveaway is over. Congrats to user "Davo Johnson" GIVEAWAY details after component links. PARTS - things usually sell out after I make videos on them so I linked a ton of extra components below that people can use if something sells out. $99 BASE VERSION Frame - http://bit.ly/2npZVch ESCs - http://bit.ly/2nq6zzi Motors - http://bit.ly/2mv9h7z (other colour motors are linked below) PDB - http://bit.ly/2n9WZ17 VTX (Base) - http://bit.ly/2mWTwCb FC (base version - naze rev 6) -http://bit.ly/2nqc3tF Strongly recommend upgrade version FPV camera (base) - http://bit.ly/2n9J0Zy Props (base) -http://bit.ly/2nUnXKj Upgrade version Frame - http://bit.ly/2npZVch ESCs - http://bit.ly/2nq6zzi Motors - http://bit.ly/2mv9h7z PDB - http://bit.ly/2n9WZ17 VTX (upgrade) - http://bit.ly/2iF1bTB FC (upgrade version - SPF3) - http://bit.ly/2nqgWmx FPV camera (upgrade) - http://bit.ly/2naaZZ2 Props (upgrade) -http://bit.ly/2myf2B4 but I love the cyclone props linked below IMPORTANT I know things sell out, A LOT and people might want other parts so there are some other links to new parts below. All of which will be great to build with. Some of the frames are especially cool for just a few $$ more. OTHER FRAMES Martian 3 frame- http://bit.ly/2dIKgwG Genius 215 - http://bit.ly/2mTx8sV Realacc x210 - http://bit.ly/2mXmdPn 210x - http://bit.ly/2nqznI1 Martian 2 - http://bit.ly/2nUsMDs (very nice frame IMO) Pheonix - http://bit.ly/2nLWu0v XY215 SPLIT - http://bit.ly/2nqKsIT IX5 - http://bit.ly/2mXjrKe OTHER MOTORS Emax 2205 2600kv x 4 - http://bit.ly/2mXfsgN (very good motors) Racerstar 2205 2500kv black x 4 - http://bit.ly/2o7LqHg Racerstar 2205 2300kv blue x 4 - http://bit.ly/2mXfEwm Racerstar 2205 2600kv yellow x 4 - http://bit.ly/2mTv4Rv Racerstar 2205 2300kv purple x 4 - http://bit.ly/2nLR71o Racerstar 2205 2300kv pink x 4 - http://bit.ly/2nUFfak Eachine Wizard 2300kv x 1 - http://bit.ly/2na8GVD Brother hobby 2205 x 1 http://bit.ly/2mXzUy7 Tornados - x 1 http://bit.ly/2nUzCIU OTHER ESCs - 30a or 20a means 30amp or 20amp 30a v2 x 4 - http://bit.ly/2nfXnNo 30a v2 lite x 4 - http://bit.ly/2nM53s8 20a Racerstar x 4 - http://bit.ly/2nFLmBT 20a 4in1 racerstar v2 x 1 - http://bit.ly/2nFZMSv 20a Littlebee Sx 1 - http://bit.ly/2mXrIhf 35a 4in1 Cicada - http://bit.ly/2mvwl5X 30a DYS XS - http://bit.ly/2mXyWBP 30A littlebee 4in1 - http://bit.ly/2o7FYnF 25a racerstar ESC x 1 - http://bit.ly/2nqwuH1 30a ZTW x 1 - http://bit.ly/2o82sVO OTHER FPV CAMERAS 700tvl cmos - http://bit.ly/2nqD3tc (nice form for easy fit) Runcam Swift - http://bit.ly/2nakSpw Runcam eagle - http://bit.ly/2nfPM1x Runcam owl - http://bit.ly/2nUKxCK Foxeer monster - http://bit.ly/2nfXvwd HS1177 - http://bit.ly/2mTB0dp (nice generic but good camera) 120 degree cam - http://bit.ly/2nqBXO8 Wide angle - http://bit.ly/2nUGd69 Aomway wide - http://bit.ly/2mXa3GA OTHER VTX’s Ft48x - http://bit.ly/2mTBobI Ts5823 - http://bit.ly/2o7S0xo 200mw Ts5828- http://bit.ly/2mvI8kD 600mw (might be too powerful for flying with others Rush vtx - http://bit.ly/2mXAE6d Gx210 - http://bit.ly/2o82cpG Immersion RC 200mw - http://bit.ly/2nakszf VTX OSD mini - http://bit.ly/2nMgTT4 (has inbuilt OSD very cool) OTHER FLIGHT CONTROLLERS Omni f3 - http://bit.ly/2nfY2yi SPF3 - http://bit.ly/2mTEj3Y Evo - http://bit.ly/2nUxYat Omni f4 - http://bit.ly/2ng4p4F Eachine naze - http://bit.ly/2nMbXh6 - Only f1 board Generic f4 board - http://bit.ly/2mTH7y1 OTHER PROPELLERS Dal v1 tri 2 pairs - http://bit.ly/2ng1jO1 Fishbones 10 pairs - http://bit.ly/2o87mC3 Dal V2 - http://bit.ly/2mvKikf (very hard to break) Dal Cyclone - http://bit.ly/2nUNXp4 (my personal Fav) POSSIBLE FPV GOGGLES Eachine goggle two - http://bit.ly/2mvB2wJ VR D2 - http://bit.ly/2nUxrFk Vr - 007 - http://bit.ly/2mTBhN6 Fatshark dominator 3 - http://bit.ly/2nUF52n Fatshark attitude v3 - http://bit.ly/2nfVkc4 Fatshark Dominator HDV3 - http://bit.ly/2mvosNW POSSIBLE DRONE RADIOS QX7 - http://bit.ly/2nqIhFk Taranis - 9xd - http://bit.ly/2nG6FTR Flysly i6s - http://bit.ly/2nMcXC1 GIVEAWAY Finished winner Davo johnson. Introduction: 0:00 Overview and comparrison: 1:41 Tools: 4:41 --- Building --- Motors: 6:00 ESC: 8:00 PDB: 16:45 VTX: 20:15 Camera: 21:48 FC (Standart): 23:44 FC (Upgrade): 31:16 How to hook up a reciever: 32:16 Frame: 32:40 Props: 35:00 --- Ending and Final thoughts --- Review: 37:00 Flight footage: 39:24
https://wn.com/How_To_Build_A_Pro_Fpv_Racing_Drone_For_Only_99_Full_Build_Guide_Giveaway
My Ugly Pixhawk Octocopter: indoor maiden flight

My Ugly Pixhawk Octocopter: indoor maiden flight

  • Order:
  • Duration: 2:27
  • Updated: 27 Jan 2014
  • views: 2198
videos
The strange roll problem I was having previously seems to have magically disappeared. It is flying quite well now, and will be even better once I get it outside and tune it. I was hoping to get outside and fly today, but I spent too much time programming my Taranis and rigging up my landing gear from IKEA clothes hangers. Parts List A lot of this was just scrounged together from parts I already had, so I don't claim that this is an ideal build, although it does work fine. Motors: Turnigy NTM 28-26A 1200kv ESCs: Hobby King 30A (flashed with SimonK) Props: Hobby King 8045 SF (have also used 9047) Battery: 4S 2200-3000 mAH (various Turnigy and nano-tech) Flight controller: Pixhawk and GPS from 3DRobotics Receiver: FrSky X8R (connected via SBUS) Frame: FliteTest AnyCopter hub, Knuckle H-Quad parts, and landing gear made from clothes hangers :)
https://wn.com/My_Ugly_Pixhawk_Octocopter_Indoor_Maiden_Flight
The YMFC-3D V2 – Arduino quadcopter made easy – with free source code

The YMFC-3D V2 – Arduino quadcopter made easy – with free source code

  • Order:
  • Duration: 8:21
  • Updated: 21 Jan 2016
  • views: 54074
videos
Questions? Visit the YMFC-3D V2 website: http://www.brokking.net/ymfc-3d_v2_main.html Check the $150 hardware list on this page (click question 8) : http://www.brokking.net/ymfc-3d_v2_qanda.html You think that building a DIY Arduino based quadcopter is difficult? Think again. I made the YMFC-3D V2 flight controller software so everybody can build their own Arduino quadcopter and having a great learning experience. School project, just for fun or something to build with you kids? No fancy or difficult software. Easy build, easy setup and fun to fly.
https://wn.com/The_Ymfc_3D_V2_–_Arduino_Quadcopter_Made_Easy_–_With_Free_Source_Code
MPU-6050 6dof IMU tutorial for auto-leveling quadcopters with Arduino source code

MPU-6050 6dof IMU tutorial for auto-leveling quadcopters with Arduino source code

  • Order:
  • Duration: 13:00
  • Updated: 21 May 2016
  • views: 132462
videos
This video explains how to program your own inertial measurement unit, or IMU for short, that can be used for auto-leveling (self-balancing) a multicopter. No Kalman filters, no libraries, no difficult calculations, just a simple and easy to understand tutorial that explains how to build an IMU that can be used for auto-leveling a multicopter. Website and Arduino code: http://www.brokking.net/imu.html Part 2: https://youtu.be/j-kE0AMEWy4
https://wn.com/Mpu_6050_6Dof_Imu_Tutorial_For_Auto_Leveling_Quadcopters_With_Arduino_Source_Code
Improve your Arduino programming skills - The budget oscilloscope.

Improve your Arduino programming skills - The budget oscilloscope.

  • Order:
  • Duration: 16:05
  • Updated: 06 Oct 2016
  • views: 62469
videos
If you are on a shoestring budget a decent oscilloscope is not an option. But what about those cheap budget oscilloscopes? Is it rubbish or can it still be a useful tool to improve your engineering’s skills? Well, I bought one to try it out. In this video I will be using the Hantek 6022BE 20MHz dual channel oscilloscope. Three examples will give you a better understanding of what can go wrong while building a simple Arduino setup. The Oscilloscope that I bought: http://www.dx.com/p/hantek-6022be-2-ch-analog-20mhz-48ms-s-oscilloscope-silver-black-201072?Utm_rid=78761898&Utm_source=affiliate My website: http://www.brokking.net Content of the cd: http://www.brokking.net/Youtube/Hantek_6022BE_CD.zip Sigrok and OpenHantek: https://sigrok.org/wiki/Hantek_6022BE http://openhantek.org/ Arduino attachInterrupt() page: https://www.arduino.cc/en/Reference/AttachInterrupt
https://wn.com/Improve_Your_Arduino_Programming_Skills_The_Budget_Oscilloscope.
(3/9) Quadcopter Building for Beginners - The Flight Controller, options and checking

(3/9) Quadcopter Building for Beginners - The Flight Controller, options and checking

  • Order:
  • Duration: 18:24
  • Updated: 08 Jul 2016
  • views: 47208
videos
Consider supporting the channel by visiting http://www.patreon.com/painless360 In this third video in the series we look at the flight controller (a clone of the Seriously Pro F3 flight controller) but this works with Naze32 and other boards based on both of them. We look at what the flight controller actually does and then show how to load Cleanflight and connect to the board for the first time to make sure it's ok. You can see the kit we're using here - http://goo.gl/u3N0Fk Join us in the next video where we look at the frame and working out how to mount all the pieces we have. Thanks for watching, please LIKE and SUBSCRIBE. Happy flying!
https://wn.com/(3_9)_Quadcopter_Building_For_Beginners_The_Flight_Controller,_Options_And_Checking
Flipping the wrong switch is causing a very stressful 1km octocopter flyaway.

Flipping the wrong switch is causing a very stressful 1km octocopter flyaway.

  • Order:
  • Duration: 9:37
  • Updated: 15 Nov 2015
  • views: 13480
videos
Looking at the sky and seeing a whole lot of sky…… but no octocopter. We all seen the DJI Phantom and Inspire 1 flyway’s. But this can also happen when you are not paying attention and accidentally flip the wrong switch on your transmitter. See the build of this octocopter here: https://www.youtube.com/watch?v=G52LtnBRG5w And the playlist: https://www.youtube.com/watch?v=lW7NbzqJ_5w&list=PL0K4VDicBzsgMF4rrGlGWlBwrtJMf0Dmp
https://wn.com/Flipping_The_Wrong_Switch_Is_Causing_A_Very_Stressful_1Km_Octocopter_Flyaway.
15 Multirotor Tips when building and flying - Quadcopter / Hexacopter / Octocopter

15 Multirotor Tips when building and flying - Quadcopter / Hexacopter / Octocopter

  • Order:
  • Duration: 12:42
  • Updated: 25 May 2014
  • views: 35254
videos
I wanted to take a moment to share with everyone some tips for multirotors (quadcopters, hexacopters, tricopters, octocopters). Whether you're going to be building one or already built or bought one you will want to remember all of these things. 1. Check all solder joints well 2. Tighten all screws (once you know everything is good - locktite) 3. GPS/Compass facing front 4. Flight Controller facing front 5. Use foam on flight controller - http://shop.dubro.com/p/1-4-r-c-protective-foam-rubber-qty-pkg-1?pp=12 6. Balance props 7. Tighten prop adapters 8. Velcro on battery and velcro strap 9. Setup battery failsafe 10. Setup radio failsafe 11. Range test with radio/receiver 12. Make sure GPS is locked in before flying 13. Keep multirotor balanced (battery/cameras) 14. Explain RTL/RTH 15. Use lights at night Recorded using a combination of iPhone 5S and GoPro Hero 3 Black. Thanks for watching. Also if you have a GoPro or are wanting to buy one please join our FaceBook group. https://www.facebook.com/groups/gopro.digital.camera/
https://wn.com/15_Multirotor_Tips_When_Building_And_Flying_Quadcopter_Hexacopter_Octocopter
Octocopter drone takes flight over San Francisco

Octocopter drone takes flight over San Francisco

  • Order:
  • Duration: 3:12
  • Updated: 11 Oct 2012
  • views: 3394
videos
A video camera equipped octocopter is flown at Burning Man Decompression in San Francisco by the guys at ZM Interactive. http://www.zminteractive.com/
https://wn.com/Octocopter_Drone_Takes_Flight_Over_San_Francisco
Tarot T1000 Octocopter maiden flight with 3 axis gimbal and Radian System

Tarot T1000 Octocopter maiden flight with 3 axis gimbal and Radian System

  • Order:
  • Duration: 4:36
  • Updated: 06 Oct 2013
  • views: 76810
videos
Subscribe to this channel here: http://www.youtube.com/subscription_center?add_user=Locoracers Did the maiden flight today with my Tarot T1000 and the 3 axis gimbal. Went surprisingly flawless. Sorry for the bad quality of the Canon 600D but it was already getting dark and I do not have a fix lens at the moment. Will get one soon :-). This represents basically the flight done after coming straight from the building bench. The Radian System has been setup just on the bench before that flight and you can see that the stabilization is pretty good. I have also tried to use the Tarot ZYX GS System but was not able to get really decent results out of it. Also it seemed to me that the gains were not stable (Temp Drift e.t.c.) No color correction or warping has been applied to the footage. Sensitivity of the DJI Wookong has been set initially to approx. 200 on all parameters. Check out the second flight with a Sony Camcorder here: http://youtu.be/4rUDns1nXLU I have set up the rig to allow a camera operator controlling the gimbal independently using a Futaba T14SG as second TX. Some technical details: - Flightcontroller DJI Wookong-M - 8 Motors (Tarot 4114/320) and ESC (DUALSKY XC4018CA Brushless ESC 40A) - 3 axis Gimbal is powered from a Castle BEC 20A and a 3S battery - Props are Silentwing Carbon 15 x 5.5 - Gimbal is a Tarot 5D 3 axis gimbal with Radian System and FF Servos Find Locoracers on Facebook: https://www.facebook.com/pages/Locoracers-RC-Fun/117284075011990?ref=hl See the other flights: http://youtu.be/NwOUCw_wOSE http://youtu.be/4rUDns1nXLU
https://wn.com/Tarot_T1000_Octocopter_Maiden_Flight_With_3_Axis_Gimbal_And_Radian_System
My new diy quadcopter fligh controller for autonomous flight. Bye Bye Arduino Uno

My new diy quadcopter fligh controller for autonomous flight. Bye Bye Arduino Uno

  • Order:
  • Duration: 5:55
  • Updated: 10 Jul 2015
  • views: 48703
videos
In this video I show my new personal designed multicopter flight controller and explain some of it's features. Check my website for more information: http://www.brokking.net/rpas_main.html
https://wn.com/My_New_Diy_Quadcopter_Fligh_Controller_For_Autonomous_Flight._Bye_Bye_Arduino_Uno
Octocopter ESC Calibration

Octocopter ESC Calibration

  • Order:
  • Duration: 0:54
  • Updated: 08 Oct 2012
  • views: 339
videos
https://wn.com/Octocopter_Esc_Calibration
(1/8) APM 2.5/2.6/2.7/2.8 - Simple installation and setup overview

(1/8) APM 2.5/2.6/2.7/2.8 - Simple installation and setup overview

  • Order:
  • Duration: 17:46
  • Updated: 21 Jul 2014
  • views: 416029
videos
Consider supporting the channel by visiting www.patreon.com/painless360 See my playlist for all the videos in the series - https://www.youtube.com/playlist?list=PLYsWjANuAm4oswLMu9OU8yOm-9J6y30XW In this first video of the APM 2.5/2.6 series I show how to take the new board from 'out of the packet' to having the board connected to the radio receiver, configured and setup ready for installation into the frame of the model. http://ardupilot.org/ The latest firmware version supported on the APM 2.x boards is V3.2.1. When loading the firmware choose the option in the lower right hand of the screen to select 'Pick Previous Firmware' to load V3.2.1 of the code. In this video we cover -- • What you'll need • Selecting and installing the firmware • Calibration of the magnetometer and accelerometers • Connection to the radio receiver • Calibration of the RC channels • Selection of the flight modes In the next video I will show how to connect the board into the model and test motor connection. Thanks for watching, please like the video and subscribe! Happy flying.
https://wn.com/(1_8)_Apm_2.5_2.6_2.7_2.8_Simple_Installation_And_Setup_Overview
Tarot 680pro octocopter engine calibration faild apm+ardupilot

Tarot 680pro octocopter engine calibration faild apm+ardupilot

  • Order:
  • Duration: 2:28
  • Updated: 01 Feb 2015
  • views: 261
videos
https://wn.com/Tarot_680Pro_Octocopter_Engine_Calibration_Faild_Apm_Ardupilot
Arduino drone - Part1 Flight Controller

Arduino drone - Part1 Flight Controller

  • Order:
  • Duration: 9:18
  • Updated: 19 Apr 2017
  • views: 33905
videos
Full Arduino based drone. The tutorial is divided in a few parts. In this video I build the flight controller using the Arduino NANO and the MPU6050 gyro//accelerometer. To program the flight controller I've used the multiwii platform. Wait for the next parts, the radio receiver/transmitter and the final drone build. Help my projects on Patreon : https://www.patreon.com/ELECTRONOOBS my Q&A page: http://electronoobs.com/eng_preguntas.php ------------------COUPONS-------------------- Crealitu CR10: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_441282.html?lkid=11382974 Coupon code: "11CR10EU" Creality CR10 MINI: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_778274.html?lkid=11814180 COUPON: CR10MINI Anet E10: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_664901.html?lkid=11382975 Coupon code: "ANET10" ------------------LINKS-------------------- Flight controller webpage: http://www.electronoobs.com/eng_robotica_tut5_3.php Transmitter/receiver webpage: http://www.electronoobs.com/eng_robotica_tut5_2.php Drone build webpage: http://www.electronoobs.com/eng_robotica_tut5_1.php Full tutorial webpage: http://www.electronoobs.com/eng_robotica_tut5.php Multiwii downlaod: http://www.electronoobs.com/eng_robotica_tut5_3_code1.php Full part list: http://www.electronoobs.com/eng_robotica_tut5.php PID tutorial: http://www.electronoobs.com/eng_robotica_tut6.php ----------------MATERIAL---------------- Arduino NANO: http://www.ebay.com/itm/Nano-V3-0-Mini-USB-ATmega328-5V-16M-Micro-controller-Board-CH340G-Arduino-Cable-/162002876661?hash=item25b81fb8f5:g:RYYAAOSw5cNYfJ0j MPU6050: http://www.ebay.com/itm/MPU-6050-6DOF-3-Axis-Gyroscope-Accelerometer-Module-for-Arduino-DIY-/201415045005?hash=item2ee545af8d:g:OSwAAOSwDwtUm4WP Drilled PCB: http://www.ebay.com/itm/15Pcs-Baklite-Copper-Plated-Prototype-PCB-Board-7cmx5cm-/321467329096?hash=item4ad8f22a48:g:a~sAAOSwuLZY0Kx6 Male pins: http://www.ebay.com/itm/5-PCS-40-Pin-2-54mm-Single-Row-Straight-Male-Female-Pin-Header-Strip-AD-/112176232585?hash=item1a1e397889:g:9YcAAOSwEzxYT2Oz 12A ESC: http://www.ebay.com/itm/1-x-Emax-12A-Speed-Controller-ESC-with-SimonK-Firmware-For-FPV-QAV250-Quadcopter-/162242578390?hash=item25c66947d6:g:kwsAAOSw8w1YBIaK ----------------SCHEMATICS------------ Flight controller schematic: http://www.electronoobs.com/eng_robotica_tut5_3_sch1.php ---------------------CODE------------------- MPU6050 test: http://www.electronoobs.com/eng_robotica_tut5_3_code2.php Multiwii downlaod: http://www.electronoobs.com/eng_robotica_tut5_3_code1.php Like share and subscribe to motivate me. Thank you
https://wn.com/Arduino_Drone_Part1_Flight_Controller
How to configure Open Pilot CC3D Flight Controller with Ground Controller Station v14.10 Mini Me

How to configure Open Pilot CC3D Flight Controller with Ground Controller Station v14.10 Mini Me

  • Order:
  • Duration: 19:16
  • Updated: 31 Dec 2014
  • views: 200599
videos
This video Shows you how to configure Open Pilot CC3D flight controller using the Latest Ground Control Station (GCS) v 14.10 Mini Me. Download Page for Latest GCS release: http://wiki.openpilot.org/display/BUILDS/OpenPilot+Software+Downloads Installation Instruction for GCS: http://wiki.openpilot.org/display/Doc/Installing+the+Ground+Control+Station You can buy the F450 Quadcopter shown in the video here: http://scratchbuilds.com/product/arf-f450-quadcopter-w-cc3d-flight-controller/ You can buy SB 250 Mini FPV Racing Quadcopter here: http://scratchbuilds.com/product/arf-sb-250-mini-fpv-racing-quadcopter/ Open Pilot CC3D Flight Controller here: http://scratchbuilds.com/product/open-pilot-cc3d-flight-controller-with-case/ Lemon Rx Receivers Buy Here: http://scratchbuilds.com/product-category/dsm2comrx/ http://scratchbuilds.com/product-category/dsmxcomrx/ Any more questions please feel free to post it into comments section. Thank You for watching.
https://wn.com/How_To_Configure_Open_Pilot_Cc3D_Flight_Controller_With_Ground_Controller_Station_V14.10_Mini_Me
The Building of an Octocopter from Scratch

The Building of an Octocopter from Scratch

  • Order:
  • Duration: 3:36
  • Updated: 01 Oct 2014
  • views: 705
videos
This is a video showing the construction of an octocopter. 1/8" birch plywood 1/2" 6061 aluminum tubing 2 sets of Emax 25A ESCs with 810Kv motors 10x4.5 props KK2.0 flight controller hobbyking standard servos FlySky FS-i10 GensAce 5600mAh 30c aluminum plated correlated pvc (landing gear) hobbyking hinges
https://wn.com/The_Building_Of_An_Octocopter_From_Scratch
×